Saturday, 15 May 2021

More fun with Fungi - Olympus OM-D E-M1

Last weekend I went out with a Sony a-99 and 50mm macro lens and took some fungi photos at a local forest (see last post). I had a lot of fun, and was very happy with the photos once I got the hang of the macro lens. But I also said I didn't enjoy the weight of the kit, and would like to try taking similar photos with my lighter Olympus OM-D E-M1. I was also keen to try out the 'macro' function on my 12-50mm f3.5/6.3 EZ lens.

This weekend I got the chance to go out again for a couple of hours on Saturday morning, so I headed to the same spot, expecting to be able to take the same photos. What a difference a week makes to fungi in the forest!

First setup with OM-D E-M1 & Lumix 45-150mm f4/5.6 lens
Overnight on the Friday we had some very wet and wild weather conditions, but I knew the area I wanted to shoot in was fairly sheltered from the elements. Even so, when I got there I found that practically all of the fungi I had seen the previous weekend were totally destroyed! Bummer.
Luckily, there were one or two in the area remaining, so I choose my first subject and set up the first composition.

Because the E-M1 is a lighter rig than the full-frame a-99, I was able to bring my smaller, lighter tripod and still have a very stable support for the camera. In fact, I brought two tripods along with me on the shoot. My Manfrotto travel tripod (seen in the first setup image) as well as my Manfrotto 'Pixi' tripod that I normally use for vlogging. It's a very small, yet stable table-top style tripod, with a solid ball head and slightly extendable legs, that I hoped I could use to set the camera up closer to the fungi. As it turned out, for my first image I decided to use my longer telephoto lens, the Panasonic Lumix 45-150 f4/5.6, and shoot from a distance using the long telephoto end of the range.

Yellow fungi. Olympus OM-D E-M1 with Lumix 45-150mm lens. 1/13th sec @ f/11, ISO 1600

I had tried to set up the 12-50mm EZ lens in macro mode, on the steep bank that the fungi was growing out of, but I just couldn't get the balance right with the camera attached to the small 'Pixi' tripod. So I opted to pull back instead and use the larger tripod on the track, with the longer lens. The image still has the effect I was after, with the fungi filling the frame and placed in context with its surroundings. 

Second setup with E-M1 & 12-50mm EZ 
For the second fungi, growing out of a drainage ditch on the side of the track, I knew I could get down low and use the macro function on the 12-50mm EZ lens. It also meant that I could use the 'Pixi' tripod, since it fit perfectly into the width of the ditch.

As you can see from the second setup image on the right, the articulating flip-up screen of the E-M1 came in very handy. With the camera on a small tripod, placed into a ditch, getting down to see through a normal viewfinder to take a photo would have meant lying down on the forest floor and getting very dirty. Not to mention extremely uncomfortable.

But with the screen articulation found on most modern cameras, shooting from these crazy low-angles is actually a breeze. When cameras first started appearing with flippy-out screens I honestly thought they were a fad. Now I wouldn't have a camera that didn't have one. Times, they are a changing...

Macro mode on the M Zuiko 12-50mm f3.5/6.3 EZ lens is available only at the 50mm end of the lens (which makes sense) and is accessed by holding down the 'macro' button on the lens and moving the lens barrel forwards to engage macro mode. This then allows a close-focusing distance of 20cms, with a maximum magnification of 4.2X. I'm not a big macro guy, so all the facts and figures start to sound all a bit Greek to me.

OM-D E-M1 on the Pixi-pod, in the drainage ditch
What I care about are results. And the results with the 12-50mm f3.5/6.3 in macro mode are (to me at least) fantastic. For the fungi images I wanted to capture, the M Zuiko lens in macro mode gave me just as good an image as the dedicated 50mm macro gave me using the Sony a-99. I do stress, again, that I'm not a macro shooter, so take all this with a grain of salt. 

But with the lens engaged in macro mode, and placed around 20 cms from the small fungi I was using as my subject, it was easily able to fill the frame and give me a sharp, close-up, fungi photo.

And speaking of sharpness, there were a few settings I changed on the camera from my normal shooting style to help facilitate a nice macro image.

Cute as a button. Olympus OM-D E-M1 with M Zuiko 12-50mm EZ. 1/200th @ f/8, ISO 1600

First, because the camera was on a tripod, I turned image stabilisation off. Not needed when on a tripod. However, since macro requires reasonably small apertures, which in turn gives somewhat slower shutter speeds, I also set the 2 second self-timer on the camera, to give it time to settle before taking the shot. Even though it balanced ok, the Pixi-pod isn't the sturdiest tripod (nor is it meant to be), so I gave it a helping hand with the 2 second timer.

I also switched the camera into manual focus, and turned 'peaking' on - just like I had when using the a-99 the week prior. This made it super easy to see the in-focus areas when manually focusing. It was also a very helpful visual aid to see how deep the depth of field was when changing the aperture. You can see at f8 above, that the in-focus area just covers the fungi. The moss it clings to is sharp just before it, and falls away quickly directly behind it. Stopping down to f/16 or f/22 would have increased the area of sharpness, but by using the peaking function I could choose the exact aperture necessary to just cover the fungi, giving me the result I was after. The fungi head 'pops' as the background blurs out.

Puffball. OM-D E-M1 and Lumix 45-150mm lens. 1/25th @ f/10. ISO 1600

I used the peaking technique on this top-down image of the fungi as well, to ensure that the ball itself was in sharp focus. f/10 did the trick, this time with the Panasonic Lumix 45-150mm lens, zoomed all the way out to 150mm.

I quickly got used to the macro 'manual focusing using peaking' technique. Setting up different shots was quick and easy, and the hour flew by. I did, however, make one rookie mistake - which the observant among you may have already picked up on. I shot everything at ISO 1600!

I only realised this as I was packing up to head home, and was re-setting my camera back to its normal (for me) settings. I kicked myself for making such a stupid mistake. But, then again, have a look at the images in this post, and tell me you would have picked that they were shot at ISO 1600 on micro four thirds if I hadn't 'fessed-up' and told you? Photographers who say that you can't go past ISO 400 with micro four thirds are talking through the proverbial hole in their heads. Yes, of course, I would have preferred to have shot these at ISO 200. But ISO 1600 is far from un-useable as some would have you believe. I certainly wouldn't hesitate to crank the ISO up to 1600 on the E-M1 if I needed to for the lighting conditions. 
 
Stand tall. OM-D E-M1 with Lumix 45-150mm lens. 1/6th sec @ f/16. ISO 1600

I've said at several stages in this post that I'm not a macro photographer. And I'm not. I appreciate that these aren't 'true' macro images, and that a 'real' macro photographer would have made a lot more of these subjects than I have.

But, having said that, for someone who just wants to have the occasional 'play' with some close-focusing, and who has no intention of owning a dedicated macro lens, then the M Zuiko 12-50mm f3.5/6.3 EZ with macro function is the bees knees 😃

Sunday, 9 May 2021

In Memoriam of the Sony A-mount

Alas, poor Sony A-mount, I knew you well (kind of). 

Sony has recently discontinued all of their A-mount products, quietly deleting them from their website. This includes their SLT line of cameras (a-99, a-77 etc), as well as all A-mount lenses. It's a shame, but also no great surprise, since their interest in the A-mount had waned considerably over recent years.

And let's face it, Sony aren't the only culprits. The world has 'gone mirrorless'. All SLR technology is going the way of the Dodo, and I wouldn't be surprised if Nikon, and then Canon, quickly follow Sony's lead and officially end production of all DSLR's. Nikon have the new 'Z' mount for their mirrorless system, and Canon are concentrating on boosting their RF lens lineup - so their can't be much (if any) R&D being put into their 'traditional' DSLR systems anymore? Canon have already stated that there will be no 5D MkV - putting an end to their incredibly popular 5-series full frame DLSR line. Surely that does not bode well for their other DSLR products either? 

I'm not lamenting the fact, other than for pure nostalgic reasons. I've been an advocate for mirrorless systems for a long time, and am thrilled that both Nikon and Canon have finally 'got in the game' seriously. It is the future, and always was the future. We can look forward with great excitement - whilst also shedding a small tear for the past.

Not that the past is going anywhere in a hurry. The used market will remain buoyant for another 20 years at least, with DLSR cameras and lenses that photographers will be more than happy to trade, collect and use. We may even see something similar with what happened to film cameras? There may be a ten year (or so) period where, because of the new technology,  DLSR's will be seen as largely worthless and available at ridiculously low prices. Followed by a resurgence in popularity (and price) as those who were raised on mirrorless 'discover' these old gems and start using them again. Maybe? Just a thought.

Surmising aside, when I heard that Sony had discontinued their A-mount products, I did come over all nostalgic-like. I have owned, and used, several Sony A-mount cameras over the years, and they were always very solid - and in some cases outstanding - performers. Case-in-point, the flagship full frame Sony a-99, which I just happen to have 'on loan' from a friend at the moment. An amazingly capable full frame DLSR - built like a tank and a joy to use.

And then, of course, there's the extra nostalgic tug of Sony's association with Minolta - a camera company that I truly loved. The A-mount was, of course, actually a re-branded Minolta M-mount, with all of Minolta's AF lenses being fully compatible with Sony DSLR's. With Sony's discontinuation of all things A-mount, all vestiges of the old Minolta camera company are now truly dead. And that really does sadden me.

Yet as I said earlier, I have moved on to mirrorless, currently with the Olympus OM-D EM1. But since I had the Sony a-99 kicking around, and with my thoughts freshly on the news of the A-mount demise, I decided to pay homage to the A-mount (and Minolta) and take the a-99 out for one final spin.

Coal Creek Falls. Sony a-99 with Minolta 17-35mm. 1/5th sec @ f8, ISO 64. Polarising filter

It was a very dull, overcast morning, so I decided to once again head out to my local waterfall. It's Autumn here in NZ as I write this, and the fungi are out in full force. Since I had a Minolta 17-35mm ultra-wide, and a Minolta 50mm macro as my two lenses, what better place to visit than the native bush.

Growth. Sony a-99 with Minolta 50mm macro. 1/5th sec @ f5.6, ISO 64

I'm not all that used to using a macro lens, so it took a while to figure out the process.. Eventually I realised that if I set the camera up on the tripod, and then manually focused, I could get better results than using the AF. Manually focus was a breeze, since the a-99 has a 'peaking' feature which automatically activates when you switch to manual focus. The 'in-focus' areas are indicated with a bright red outline so you can clearly and confidently set your focus. This feature isn't unique to the Sony's (it's also available on my Olympus EM1), but it's still nice to see it on the a-99.

 

Fungus stack. Sony a-99 with 50mm macro. 1 sec @ f22, ISO 800 

I said earlier that the fungus would be out in force this time of year, and I wasn't disappointed. They were everywhere, in all shapes and sizes, and I could have spent all day photographing them. It was a lot of fun, and not my normal subject matter. I enjoyed using the macro lens, and as already stated, the a-99 made this process very easy. 

Not only was peaking for sharpness helpful, but the fully articulating 3" screen was also greatly appreciated. It's one of the best designs I've ever used for screen articulation - being able to be positioned at almost any angle. It meant that I could place the camera and tripod very low to the ground, but raise and angle the LCD screen so that I could easily compose the shot without having to lie down on the wet forest floor. If I did a lot of forest fungi photography, I would seriously consider the Sony a-99 as my main camera for its articulated screen alone.

Button Fungi. Sony a-99 with Minolta 50mm macro. 1/2sec @ f16. ISO 800

While I appreciated many of the features available on the a-99, and did thoroughly enjoy my morning out with it, there was one thing I was very aware of that I didn't enjoy - the size (and weight). I know people harp on about this as the main factor many switch from a DLSR to Mirrorless - but I guess there's a reason for this. In the end, it's true. And it's not just the camera body, it's all the other associated products like lenses and tripods, that go together to add on the weight.

As a fully professional DLSR, you would expect the full frame a-99 to be built like a tank. And it is. The fully magnesium alloy body weighs in at around 733 grams, which is actually one of the lighter full-frame body weights. The Canon 5D MkIV, for example, weighs 890 grams, while the Nikon D850 is a whopping 915 grams. And this is without battery and lenses mounted. In comparison, my Olympus OM-D EM1 weighs 497 grams, including the battery. And the lenses offer even a greater weight saving.

Between two ferns. Sony a-99 with Minolta 50mm macro. 1/5th sec @ f/16. ISO 800

Since I was taking the a-99, and knew I would have to position it in some fairly precarious angles, I also decided I needed my largest (and most heaviest) tripod. After a morning of lugging the camera and tripod and lenses around the forest, I must admit I was wishing I had my Olympus gear instead. And I do plan to go back and take some more fungi images with my Olympus gear. Next time to try out the 'psuedo' macro on the 12-50mm f3.5/6.3 EZ lens.

Depth of field test. Sony a-99 with Minolta 50mm macro. Left: f/11. Right f/4

For most of the morning, since I was shooting with a macro lens, I set a fairly small aperture so I could get as much depth of field as possible. Around f/11 to f/16 was the norm, and sometimes even going up to f/22. This helped to keep most things in the image in sharp focus.

But there were also times when I played around with a narrower depth of field for a little more creative effect. The above example shows how aperture value can greatly effect the look and feel of an image when you are close-focusing with a macro lens.

Fly Agaric (amanita muscaria). Sony a-99 with Minolta 50mm macro. 1/13th sec @ f/5.6. ISO 400

Despite what I said earlier in regards to the weight of the a-99, plus lenses, plus tripod, I did enjoy my morning out shooting fungi in the forest with the camera. It has several features that make it ideal for this type of photography - not to mention the beautiful 24mp images that it produces. But then again, even that feels a little 'overkill' for me - though I realise that's almost blasphemous to say in this age of full-frame high-megapixel camera worship.

But for me, at least, it's true. I've said so on this blog over and over again. I don't need 20+ megapixels, and I strongly suspect you don't either. 12mp is probably more than enough for most use-cases, and yes, that includes large billboards.

So as I said right at the beginning of this post, I'm not lamenting the demise of Sony's A-mount. Although I realise that maybe some will. But probably not many. Most have probably already moved on to Sony E-mount, or Nikon Z, or Canon RF, or (perish the thought) micro four thirds.

And for those who do still want to stay with A-mount, maybe it's actually good news? Maybe the prices on the secondhand market will come down as people sell off their 'outdated' gear - just as they did in the days of film switching to digital?

Whatever happens, I'm glad we have the Sony/Minolta A-mount equipment that we can use for many, many years to come. No, there won't be any new releases. But that a-99, or a-77, or a-300 and associated lenses that you have will still work for the foreseeable future, and may even be serviceable by the right camera technician. So enjoy them while you can. And thanks, Sony, for the great products that bear the A-mount name. It was/is a great system.  

Wednesday, 4 November 2020

Olympus OM-D E-M1 fun continues

The fun of shooting my 'new' Olympus E-M1 system continues and I am trying to take very opportunity I can to get out and use it. My kit is now also complete, with the inclusion of a speedlight (more on that in a future post).

I recently had to take a trip for work, and knew that I would have a chance to stop along the way to take a few quick pictures. So I took the E-M1 with me to see what I could find to photograph as I traveled.

Old Bedford. Olympus OM-D E-M1 with M.Zuiko 12-50mm EZ. f5.6 @ 1/200th, ISO 200

I'm a sucker for rusty old cars as subjects (what photographer isn't?), so I couldn't pass up the chance to stop and take a few photos of this beauty. The reddy-oranges and browns, greens and yellows all compliment each other and create a vibrant portrait of this old vehicle ending it days on the side of the road. Not a particularly dignified way to end your days perhaps, but it certainly makes for a great photo.

The theme of 'old and abandoned' was going to be a re-occurring theme throughout the images taken on this outing. The West Coast has a lot of 'rusty relics' and old buildings that make for great images. Although I have to say that my excitement at finding another dilapidated building or abandoned classic truck to photograph is always tinged with a sense of sadness. Whenever I look at them, I can't help but think about the lives they touched when they were brand new and full of potential. Such is progress I guess?

Abandoned House, Ikamatua. Olympus E-M1 with M.Zuiko 12-50mm EZ. f6.3 @ 1/500th, ISO 200

I had photographed this house quite recently, with the Fujifilm X-E2. But it was on a different day, with very different lighting conditions. The X-E2 image (in this blogpost here) was taken on a very blue-sky day, with a large cloud floating above the house - which I really liked. The above photo has a lot less contrast, since it was shot on a very overcast day. It softens the mood, but brings out heaps of detail in the old wood - which I also really like.

The E-M1 may 'only' have a 16MP micro four thirds sensor, but it is still capable of extracting a lot of extra fine detail. One of the major benefits of micro four thirds are the lenses sharpness and clarity, since the sensors smaller size allows for light to reach the entire sensor more symmetrically, hence avoiding corner distortion. It may sound like marketing hype, but in my 'real-world' experiences, all the lenses I've used on the Olympus cameras have been extremely sharp, edge-to-edge. Even the kit lenses and the very cheap and plastic telephotos produce sharper images than they have a right to, considering their price.

St Patrick's Catholic Church, Ikamatua. E-M1 with M.Zuiko 12-50mm EZ. f10 @ 1/200th, ISO 200

Case-in-point is the above photo of St. Patrick's Church. Shot at f10, focused on the front gate, and set to the widest zoom (12mm to fit everything in), the resulting image is bitingly sharp all over the frame. Some of that has to do with the f10 aperture - which on a smaller micro four thirds sensor is f20 full-frame equivalent - but even stopping down the aperture won't make an inherently soft lens sharp.

I'm not going to continually try to defend the micro four thirds sensor, since its detractors will rubbish the system no matter what you say. However, for those who are open to a different point of view, and who might be generally interested in micro four thirds but only ever hear negative comments, I think it's worth showing how good the images really can be from the system.

As mentioned, it was a very dull and overcast day when I shot these photos, which meant that the sky was really just one large expanse of white cloud. Even my naked eye couldn't perceive any detail in the sky, and the ORFs (Olympus Raw Files) were certainly a bright, bland white when first imported into Lightroom. I was careful not to 'clip' the highlights when shooting, so I knew there was probably some detail there, but didn't hold out much hope of getting anything interesting in the way of clouds.

Grabbing the 'Highlight' slider and moving it all the way to the left to increase highlight definition made a huge difference, and brought back sky detail that I wasn't even aware was there. These smaller sensors are derided for their 'poor' dynamic range - usually by photographers who have invested a lot of money in larger sensors for 'superior' dynamic range. 

And yet the truth is that the E-M1 holds up remarkably well in terms of its ability to capture dynamic range. DXO Mark rate the E-M1's sensor as capturing almost 13 stops of dynamic range (12.7 Evs to be exact). In comparison, the APS-C sized sensor in the Canon 80D can handle just over 13 stops (13.2 Evs) - probably only around half a stop more than the Olympus. The E-M1 sensor actually has better dynamic range capabilities than the APS-C Nikon D300 and Canon 7D. That's hardly a terrible result for the micro four thirds sensor. And yet the notion that their sensors exhibit poor dynamic range still persists! 

I'm not trying to argue that the sensor is 'best in class' - of course not. There are many sensors - both APS-C and full-frame, that beat it for high dynamic range. But if your exposure is there, or there abouts, then you should easily be able to recover two to three stops of information easily. If you've blown the exposure by four to five stops (or more), then you probably need to question photography as a hobby and should maybe consider taking up painting instead? Just saying...

End of the Road. Olympus OM-D E-M1 with Lumix 45-150mm. f/6.3 @ 1/200th, ISO 200

I started with an old car, so I thought I would up the ante and end with a couple of them 😉

The Olympus OM-D E-M1 is an impressive bit of kit, no matter how you look at it. Yes, it might be coming up 8 years old now, but so what? That just means it's a bargain on the used market - especially for a pro-spec'd body (weather-sealing, rugged construction and 150,000 rated shutter).

I'm constantly amazed by the plethora of 'is it still good enough' videos that talk about the 'old' cameras as if they came out with Noah on the Ark! Of course it's 'good enough' - certainly for 99% of what most photographers would want to use it for. If you're a pro sports shooter then this camera probably isn't for you. But if you are a pro sports shooter, then you probably knew that already. If, however, you just want to photograph the kids playing soccer on the weekend, then have at it! The E-M1 will be plenty fast enough.

It's also not a video-centric camera, so serious video shooters should look elsewhere. But don't dismiss the micro four thirds platform for video. Check out the GH Panasonic Lumix line if video is important but you also like to shoot stills with the same camera body.

About a year ago, sensationalist Youtubers' who make their money producing 'click-bait' videos claimed that "micro four thirds was dead." So of course they all went into prophetic rapture when Olympus announced it was selling its camera division to JIP a few months ago. "Olympus is dead. Micro four thirds is no more. See, we were right!" they collectively cried.

Yeah? Well hang on a minute there Bucky. The Olympus camera division may be no more, but JIP (Japan Industrial Partners) fully intend to continue the Olympus micro four thirds line under a new name: OM Digital Solutions. Products that were already in development will be released, and warranties for all new products will be honored. So if you purchased an OM-D E-M3 at the beginning of the year, the warranty for the product is still valid.

Old Church, Totara Flat. Olympus OM-D E-M1 with M.Zuiko 12-50mm EZ. f8 @ 1/400th, ISO 200

Of course no company is bullet proof. Not even Canon or Sony. Kodak proved that twenty years ago. But micro four thirds is far from 'dead'. And neither is the DLSR, which is the new doomsday prophecy. JIP may not be able to sustain and grow OM Digital Solutions in the long-term. Who knows? But that's at least what they are setting out to do. Better that than Olympus simply shutting down their camera division altogether (they retain a 5% share in OM Digital).

Maybe they will limp along like Ricoh has with Pentax - releasing a new camera every few years, but not really setting the world on fire with new products? Maybe keeping the Olympus faithful happy will be all that is required to sustain their business model? But whatever happens, the Olympus camera you have now, and the lenses you have - and can still get for it - will work for a very long time to come if taken care of properly. In all honesty, I could probably quite happily use the E-M1 that I have now until the day I retire from this hobby. And I'm hoping that's at least another twenty to thirty years!

Monday, 26 October 2020

Olympus OM-D E-M1 in 2020 and beyond!

My 'new' Olympus OM-D E-M1 system is coming together nicely, and I'm almost there in terms of a fully rounded kit. I purchased the body, HLD-7 grip and Panasonic 45-150 f4/5.6 OIS together in Christchurch.Then quickly added the 12-50mm f3.5/6.3 EZ to use as my 'standard' walk-around lens. This was the lens I used when I had my E-M5 Mk2 and it's a great landscape lens, since it starts at 12mm (24mm fov) at the wide end.

Lake Brunner Yacht Club, Moana. Olympus E-M1 with M.Zuiko 12-50mm f3.5/6.3 EZ. f8 @ 125th

It's spring here in New Zealand at the moment, and spring on the west coast means one thing - rain! Great weather for the ducks, and for our native rain forests, but not so great if you want to get out and take photos. Even with a weather-sealed camera like the E-M1. Fortunately it doesn't always rain (although sometimes it sure does feel like it), and last weekend (as I write this) was a gorgeous, clear spring day. Time to take the new camera and lens combo out for a spin!

Lake Brunner Yacht Club Jetty. OM-D E-M1 with 12-50mm EZ. f5.6 @ 125th, ISO 200  

As mentioned, this is a combination that I have used before, so I already know what to expect. Still, it's nice to get some images with the system 'in the bag' so to speak - and there is always an initial settling in period when you are reacquainting yourself with the manufacturers way of doing things.

I had spent about an hour the previous night configuring the E-M1 to fit my style of shooting. Just little things, but they make a huge difference out in the field. For example, because I can preview the exposure before taking the shot, I turn 'image review' off completely. I don't need to see a sample of what I've just taken, since I've already seen what it will look like in the gorgeous 2.6m dot EVF before pushing the shutter.

I've also reversed the front and rear control dial functions. I prefer to have the front dial change the aperture (I shoot in aperture priority 99.9% of the time) and the rear dial change exposure compensation (it's the other way around by default).

R & R Sally. Olympus OM-D E-M1 with M.Zuiko 12-50mm EZ. f8 @ 125th, ISO 200

Since I never intend to shoot video with the E-M1, I have also re-configured the video record button to bring up the ISO. And with the 'super control panel' activated, I'll never really need to go back into the Olympus menu system again. So a camera that many people find overwhelmingly confusing to navigate, can in all actuality be very simple to use if you take some time to set it up right.

The touch screen on the back is a great addition which also simplifies navigation, as is the 'touch to focus' function. And finally, I have the 'Function 1' button set to quickly re-center my autofocus point. So all-in-all, it is a very intuitive shooting experience, and an absolute joy to use.

The Pub on the Lake. OM-D E-M1 with M.Zuiko 12-50mm EZ. f8 @ 1/50th, ISO 200

I don't want to harp on about 'softness' issues with my Fujifilm X-E2 - I've covered that already in my  previous post here. Suffice to say that the files from the Olympus E-M1 are super sharp, and that's with the relatively inexpensive 12-50mm 'kit' lens. Dynamic range isn't bad either. No, it's not as good as you would get from a full-frame sensor, but I do believe it easily competes with most other 16MP APS-C sensors for recoverable shadows and highlights.

The image above had some fairly dense black shadow areas in the black boat and water, since I exposed to preserve the highlight detail in the white boat and clouds. But they 'opened up' easily, and cleanly - especially since it was shot at the E-M1's native ISO of 200. You can shoot 'low' ISO of 100, but I don't see the point - unless you are trying to extend the shutter speed time for some long exposure shots?

Waiting patiently. OM-D E-M1 with M.Zuiko 12-50mm EZ. f6.3 @ 1/250th, ISO 200

One other 'feature' worth mentioning on the E-M1 is the 5-axis image stabilization that is good for about four extra stops of hand-holding (probably more with excellent technique). This is a brilliant to feature to have 'in-body', since all your lenses are now image stabilised. Olympus has class-leading image stabilisation, and even though I didn't need it on this particular morning, it's great to know that it's there when required.

Apparently some of the newer Olympus bodies (the EM1x and the E-M5 Mk3) can be hand-held down to four or five seconds and still give sharp results! And some have even claimed to have achieved sharp images at 10 seconds!?! That's just crazy talk!

Boathouse, Te Kinga. OM-D E-M1 with M.Zuiko 12-50mm EZ. f8 @ 1/80th, ISO 200

I thoroughly enjoyed my morning spent reacquainting myself with the Olympus OM-D E-M1. The ORF (Olympus Raw Files) are sharp, colourful, contrasty and exhibit a decent dynamic range for post-processing. It has a 16MP sensor - more than enough for most people's image requirements if you're not a huge cropper of your images (you shouldn't be). It also features class-leading image stabilisation, a big, bright and clear evf, fantastic ergonomics for a mirrorless camera (especially with the grip attached), and a well implemented live-view with tilting touch-screen. The body (and certain lenses) is weather-sealed and freeze-resistant (down to -10 degrees). It shoots at up to 10fps, has decent autofocus tracking, a huge selection of excellent optics, and is one of the most customisable cameras on the market. Really, what more do you want!?

Since it's built to pro-grade specifications, with a shutter rated for at least 150,000 actuation's (it's done 20k so far) I'm sure that it will last me at least ten years and still be going strong. That's not to say that I'll still be using it in ten years - I go through camera systems far too frequently to make that sort of claim. But what I can say, with a certain amount of confidence, is that it could see me through that long - at least - and still be producing beautiful images. Of that I'm sure.

Jet boat, Te Kinga. OM-D E-M1 with M.Zuiko 12-50mm EZ. f8 @ 1/80th, ISO 200

I said at the start that my O-MD kit was 'coming together' nicely - and to that end, I've got a couple more items coming this week to complete the system. First off I ordered an after-market lens hood for the 12-50mm. I've had one of these in the past and it works well - if just a little tight to begin with - and is certainly a lot cheaper than the ridiculous amount Olympus charges for theirs! 

Second, I ordered two after-market batteries - again for the same reasons that I ordered the after-market hood. I've used grey market batteries in all my cameras in the past, and they work fine. No, they probably don't last as long as the manufacturers ones do, and maybe they don't hold as much of a charge - but generally they do the job. And since you can get about six of them for the price of one Olympus battery, you can afford to chew through them a bit quicker.

Cashmere Bay, Te Kinga. OM-D E-M1 with M.Zuiko 12-50mm. f8 @ 1/250th, ISO 200

Finally - and probably most importantly - I've got another lens coming for the E-M1. And it's another lens that I have owned previously when I had my first E-M1. With the Olympus 12-50mm and the Panasonic 45-150mm I've got most things pretty well covered. But you couldn't call it 'fast' glass. So to round out my system, I've purchased the Panasonic 25mm f1.7 prime lens - a 'nifty fifty' for micro four thirds. I almost dropped the extra $$$ for the Panasonic Leica f1.4 version, but in the end, decided that the f1.7 would be 'fast enough' for what I am likely to use it for. So I saved myself almost half the cash by getting the f1.7 version (for $200NZ).

As I said, I've owned it before, and it's a lovely lens. So no regrets in not going for the Leica f1.4. With the money I saved, I may look around for an external flash, which is about the only piece of the puzzle left to fill in. Once that's achieved, then I'll have a fantastic 'do it all' kit that should see me right for a very long time. Here's hoping....

Friday, 23 October 2020

Mirrorless wins! Again.

In my last post I was travelling to Christchurch to choose a new camera. For most of the post I discussed leaving the Fujifilm mirrorless system, and possibly moving back to the Nikon DSLR system. I had my eye on a couple of Nikon D7000s, as well as a possible Nikon D610 full frame. And then, at the end of the post, I made a throw-away comment regarding an Olympus E-M1.

Turns out it wasn't such a throw-away comment after all. When I got to the store in Christchurch (shout out to Greg and the team at Photo & Video) on Monday morning, the weekend had seen a run on their secondhand Nikon gear. Both D7000's were gone! Just as well I did have a plan 'B'.

And actually, the more I had thought about it over the weekend, the more I had come to the conclusion that my plan 'B' was really my plan 'A'. So when I arrived in store and was told that both the Nikon's were gone, I was actually relieved. The decision had quite clearly already been made for me 😄

Helping Hands. Olympus OM-D E-M1 with Panasonic 45-150mm. f6.3 @ 1/250th, ISO 200

My positive impressions of the micro four thirds system had been rekindled with my recent testing of camera sensors (see last post here). Having looked back over a lot of landscape images from the last few years, I was impressed with how good the photos taken with my E-M1 looked compared to other (larger) imaging systems. Turns out that for what I use my images for, micro four thirds quality is plenty good enough. And that's not damning with faint praise.

Above is the first image I took on my 'new' E-M1. And it's sharp. Super sharp. Sharper, I believe, than the files from my X-E2 would have been. Maybe that has something to do with the extra depth of field you get from the smaller sensor - where f6.3 is really more like f13 in full-frame. But I also think that the actual pixel-level detail is clearer and sharper than what I was getting from the Fujifilm X-Trans II sensor. The E-M1 files just look 'crispier'? Not 'overly' digital at all, but certainly less 'smeary' than the  images I was getting out of the X-E2.

Gnarly Tree, Botanic Gardens. Olympus E-M1 with Panasonic 14-150mm. f5.6 @ 1/60th, ISO 200 

I used the Olympus micro four thirds system for about two years - probably about two years ago - first with the OM-D E-M5 Mk2, and then with the E-M1. So I'm fairly familiar with the layout and how they work. Many complain about the Olympus menu system being difficult to navigate, but I don't find that at all. I'd call it 'dense' rather than difficult. But even I will admit to now having to go through a fairly steep 're'-learning curve on the E-M1.

Fortunately, every button and dial on the Olympus OM-D E-M1 can be re-programmed and configured to work exactly how you would like it to. This is great, but is also where some of the confusion with the menu system comes into play. But if you are methodical, take your time, and set things up exactly how you like, then the E-M1 becomes an intuitive joy to use.

Christchurch Rose Garden. E-M1 with Panasonic 45-150mm. f6.3 @ 1/125th, ISO 200

My previous E-M1 was an all-black body, whereas this 'new' one is the more retro-looking silver and black version - which I actually prefer. The camera store did also have an all-black version, for a cheaper price, but it had done twice as many shutter actuation's (42k as opposed to 20k) and certainly looked the worse for wear. So I opted for the slightly more expensive silver-black version, and I'm glad I did.

To my surprise, and great delight, they also happened to have an HLD-7 grip secondhand. It wasn't showing on their website, so I thought I was going to have to fork out for a brand new one - at more than three times the price! But there it was, sitting on the shelf, ready and waiting for me 😊

I've written quite a lot over the years about my struggles with changing to mirrorless - mainly due to the smaller sizes. Don't get me wrong, I'm more than happy to carry around smaller, and lighter gear. But even though I'm not a big guy and don't have large hands, there quickly becomes a point for me where the cameras are too small, and buttons and dials become too fiddly! The Olympus OM-D E-M1, without the grip, is ok. But, with the grip attached, it's perfect as far as I'm concerned. Just the right amount of weight, heft and button/dial sizing.

Some might even say that it's getting a bit too big for a mirrorless system camera? But not me. I'm quite happy to add some weight to the camera body itself, since the lenses are where most of the weight-saving occurs anyway. The Panasonic 45-150mm lens I purchased with the E-M1 body is tiny! It's an ultra lightweight and ultra compact (90-300mm f4/5.6 equivalent) lens with optical image stabilisation included (although the E-M1 reverts to its own superior in-body stabilisation instead). Its overall length is only 73mm and it weighs in at a tiny 200 grams. That's just crazy talk for a 90-300mm, even at f4 to f5.6!

Hansen Park, Christchurch. E-M1 with Panasonic 45-150mm. f5.6 @ 1/400th, ISO 200

When I knew that I was going to replace my Fujifilm X-E2, I sat down and made a list of all of the 'features' I wanted in a camera. Since I mostly enjoy going out and shooting landscapes, I wanted a camera that was suited to this kind of photography. But it also had to be 'general' enough to shoot whatever else I might need to cover - from family snaps to the occasional sporting event.

I thought that the Nikon D7000 fit the bill perfectly - since it's weather-sealed, has a good 16MP sensor, high frame-rate, uses SD cards (dual card slots), and has a live-view function. But then I read more about the appalling implementation of live-view on Nikon's mid-range bodies and I started having serious doubts. You can't, for example, change the aperture value when shooting with live-view enabled! Seriously!!? You don't get a histogram on the back of the screen when you have live-view enabled. AND, what's even worse, you can't see the change in exposure on the screen in real-time with live-view enabled! WHAT!!!???? What's the point of even having live-view if that's the case? These features are available on all other cameras with live-view, at any price point. But Nikon reserves these 'special' features for their top-of-the-line (read expensive) DLSR camera bodies! Bugger that Nikon!

Who you looking at? Olympus E-M1 with Panasonic 45-150mm.

Fortunately, the Nikon D7000 isn't the only camera with all the features I'm after. The Olympus OM-D E-M1 also has 16MP, a weather-sealed body, high frame rates, used SD cards (only one slot though), and has excellent live-view functionality - as well as a tilt screen for helping with ease of viewing on a tripod. A tilt-screen isn't a feature I would have considered a 'must-have' even a few years ago. But the older I get, the more I appreciate any compositional aid that will help me shoot more easily from tricky camera angles. In fact, a flippy-out screen like the one on the E-M1 Mk3 (and many Canon's) would be even better! But I'll certainly make do with the tilt-screen on the E-M1 in the meantime.

Red Rose. Olympus OM-D E-M1 with Panasonic 45-150mm. f5.6 @ 1/25th, ISO 200

The images in this blogpost are some of the first taken with my new E-M1 setup with the Panasonic 45-150mm lens. To say that I'm happy with them would be an understatement. I'm more than happy. They are clear, crisp and sharp in a way that I honestly don't think that the files from my X-E2 were.

So yes, I think I've very much made the right decision switching (back) to micro four thirds. The E-M1 is an incredible camera, and a delight to use. I am enjoying reacquainting myself with it and am very much looking forward to taking it out on its first landscape shoot. I'm hoping that will be this very weekend....

Wednesday, 14 October 2020

Alas dear Fuji, I knew you well.

It's been a while since I posted on nzdigital (about three months), but I haven't been quiet during that time - anything but. I've been posting, instead, on my 'other' blog; The Fuji X-Files. It made sense, since I had invested heavily into the Fuji mirrorless system with the X-E2, and had a Fuji-centric blog waiting and ready to go.

And I enjoyed the Fujifilm X-E2, I really did. Well, at least I thought I did - until recently. Let me explain...

Lake Kaniere. Sony a99 with Minolta 17-35mm. f11 @ 1/80th, ISO 200.

A few weeks ago I decided to film a video for my Youtube channel, comparing images taken with a full frame, APS-C and micro four thirds camera. I just happened to have all three sensor sizes together at one time, and thought it might make for an interesting video? And it certainly was interesting, and enlightening, but not quite in the way I had envisaged it would be. 

I went into the 'experiment' with a fairly clear idea of what I thought the outcome would be (not very scientific, I know), since I've shot on all three sensors over the years and know that they can all perform fantastically. All can produce clean, clear and sharp (more on that soon) images - at least at the sizes I need to print or display my work at. I took all the images at the same focal length, with the same effective aperture, and all in RAW so I could get the very best out of each sensor.


The three cameras I tested were the 24MP full frame Sony a99, my 16MP Fujifilm APS-C X-E2, and my son's Olympus OM-D E-M5 16MP micro four thirds. Above is the edited RAW images, with a 100% crop from the extreme left edge of the frame, from each camera. The full frame 24MP image has the edge in sharpness and clarity - of course it does. But having said that, the Olympus E-M5 micro four thirds image gives an impressive performance - with the very cheap 14-45mm kit lens no less - and isn't that far behind. But what shocked, surprised, and upset me, was how poor the Fujifilm X-E2 result was! It might not be quite as obvious from the images here on the web, but compared to the Sony and Olympus, the X-E2's 100% crop from the left edge is horrible! Soft, mushy and just plain horrible! Bugger 😞

On closer inspection, it looks as if the Fujinon XC16-50mm kit lens that I've been using has a slightly de-focused left side of the image, since the right side edge was indeed sharper. So chalk that up to a lens issue and move on. Whew!

Things will surely get better if we look at the central portion of the image - all shot at an f11 effective aperture, all on a tripod. Well, hang on there Bucky. Not so fast. Once again, it might be hard to tell from these web images, but - once again, the Sony and Olympus look very sharp, while the Fujifilm X-E2... not so much.

This time the result is not so much blurry, as just every so slightly 'mushy'? Detail just isn't as distinct and 'crisp' on the Fuji as in the Sony and Olympus images. On-screen, they all look fine. Sharp and clear enough. But pixel-peep at 100% and the Fujifilm X-trans sensor is definitely more 'mushy' in rendering detail. If I was being kind (hey, I'm trying), I'd say it produces a more 'painterly' image - maybe more filmic, than the other two? Great if that's the look you're going for.

Now normally I'm not a pixel-peeper. Really, I'm not. And I'm also not someone who has to have the 'cleanest' image possible with zero noise/grain present. In fact, with the Fujifilm cameras, I'm actually purposefully going the other way and introducing grain into the image. I like the fact that they can produce very film-looking images straight out of camera - when I want that look. But I'm also not the first to have noticed a general 'softness' with Fuji RAW files that aren't there with other systems.

This image softness has mostly been attributed to Adobe Lightroom's handling of the Fujifilm RAF files (yes, I'm using Lightroom). It's a common, and oft discussed issue, with a couple of work-arounds.

First, third-party plug-ins can take over the RAW development engine inside of Lightroom to process the RAF files. This is the 'fix' preferred by those who wish to stay within the Adobe ecosystem.

Second, ditch Lightroom all together and move to Capture One for processing RAF files in the future. Capture One has worked closely with Fujifilm, and are known to have a much superior RAW processing engine for RAF files than Lightroom. People have reported much sharper images processing in Capture One than Lightroom. So fortunately, there is a fix.

Having said all that, I'm not laying the blame only at the foot of Adobe. I have to at least consider that the lens has something (a lot) to do with IQ and sharpness. I've been shooting the X-E2 mostly in jpeg, and letting the camera process the image. If you do this, then a lot of the inherent lens issues will be 'minimised' by the processing software. So that what you get out of camera should be fairly sharp, corrected images. Not so with RAW. The RAF's are unadulterated data - warts and all - and it seems that maybe the XC16-50mm has quite a few warts?

So, having established this, I made two decisions immediately. One - get a new lens, and two - start processing RAF files in Capture One.

And that's exactly what I did. I purchased the 23mm f2 prime (35mm equivalent fov) and downloaded Capture One Pro for Fujifilm (which just happened to be on special). Problem solved - right?

Well actually, no. On the lens front, I'm sure that I am getting sharper results with the 23mm prime than I was with the XC16-5mm kit lens. No doubt. It's a lovely little lens, and a joy to use.

But, when I went back and re-processed the RAF file in Capture One, I got the exact same result as I had when I used Lightroom. The Fuji file still looked 'painterly' rather than crisp and sharp. Bugger (again) 😢

After that, it was a bit like one of those inkblot tests. Once I had seen it, I couldn't 'un' see it. I started going through my back catalog of images and looking at photos at 100% (I really am NOT a pixel peeper!). If I clicked on an image at random, then I could almost always tell if it had come from the Fuji because of the painterly pixel structure. If I clicked on an image, enlarged it, and thought "great, that looks better" then it was invariably from another camera sensor (usually a Nikon). And once I started playing the 'spot the Fuji fuzziness" game, then that was really the beginning of the end for me and Fuji.

Motukiekie Beach. Fujifilm X-E2 with Fujinon XC16-50mm

I've had a lot of fun using the Fujifilm X-E2, and made a lot of amazing images with it. It's been another piece of my mirrorless journey puzzle, and shown me that I can get along with smaller cameras. But it's also been a bit of a struggle, I'm not gonna lie. The X-Trans sensor is a unique beast, and many struggle to tame it satisfactorily. It's especially difficult if you're an otherwise satisfied Lightroom user. 

Shooting jpegs and using images SOOC (straight out of camera) is a serious option to consider with Fujifilm - their film profiles are really that good. And boy, have I had a lot of fun (and wasted a lot of time) with custom film profiles. The combinations are almost endless. Which again, unfortunately, presents something of a problem. I've programmed, changed, and reprogrammed the custom film settings on the X-E2 dozens of times - tweaking, reshooting, tweaking and reshooting again - only to end up changing them all later anyway. They are fun, but for me they've also been time-wasters, and something else for me to obsess about with my photography (me, obsessive? never!?).

So I've decided - for better or worse - to move on from Fujifilm (what a shock). I've used it for about a year now, which is fairly good going for me and a camera system historically 😕 I haven't really been a one-camera-one-system guy for years now. Variety is, as they say, the spice of life.

There is, however, one love that I have returned to time after time. And I think she is calling me again... 

I'm pretty sure I was using a Nikon before I switched to Olympus, and I know I was using a Nikon D300 before switching to the Fujifilm X-E2. My first digital 'love' was the Nikon D70, tearing me away from my 20 year affair with Canon. Nikon has been the stable home in my system-swapping career, and I hear her calling me again... 

I've also thoroughly documented my struggle (love and hate relationship) with 'going' mirrorless, since I'm still convinced (as are many) that mirorrless is the future of photography. But... having grown up using SLR style cameras, the DSLR has a strong emotional, and physical, attachment to me. As soon as I pick up a solid, hefty, magnesium alloy DLSR body, it feels like coming home. They just feel so 'right'. So wonderfully good in the hand. And try as I might - and I have tried - mirrorless cameras, with all their bells and whistles, just do not feel as good to hold and use. This is a hugely underrated part of enjoying photography. How does the camera 'feel' in you hands. Does it make you want to pick it up and use it for long periods of time? For me, Nikon's just do.

Of course all of this would be moot if money was no object. It would, of course, present a whole new raft of problems - but if money was no object, then I would definitely be buying a mirrorless camera. But not a tiny wee thing like a Fujifilm XT30 or Olympus E-M10III - something solid like an Olympus EM1x or Fujifilm XT4 with grip attached. Actually, what I think I would do is wait for the new Nikon Z9. I think that's going to be a stellar camera for Nikon. But alas, I haven't won lotto (that I'm aware of anyway), so budget is, as always, a major factor.

I'm going to Christchurch this weekend (as I write this). I've sold my Fuji gear already, have a few other bits and pieces to sell, and with the money I am going to buy another camera and lens(s). I don't know exactly what I will get, but at the moment I'm thinking it will be a Nikon DLSR. Something like the D7000 pictured above. Or maybe, if my budget can stretch and I can be convinced that its sensor is clean, a full-frame Nikon D600? It will all depend on what the store has in its secondhand department at the time.

Then again, there's a very nice black and silver Olympus OM-D E-M1 for sale as well. And, as we all know, the future is mirrorless! 

Tuesday, 21 July 2020

Getting 'retro' with Digital - the Olympus Evolt E-300

Generally speaking I'm not one of those photographers who worries about the megapixel rating of a camera. I don't feel the need to shoot at 50, 40 or even 20 megapixels to take a 'good' image. Great photos have nothing to do with megapixels. I'll say that again in case you missed it - great photos have NOTHING to do with megapixels.

I have, from time to time, been known to take out a 6MP Nikon D70 and take photos with it. And despite its 'limitations' (tiny, low-res lcd screen ) I still really enjoy shooting with it. You can get some cracking images out of it. I even posted a video about my experiences with it on my Youtube channel here.

And why not? The D70 didn't stop being a camera when it was 'replaced' by the D80, or the D90 etc... Ok, 6MP won't let you print billboards, but it will let you print up to A3. And who but a handful are printing anything nowadays anyway?

Which leads me, I guess, to the subject of this post - the Olympus Evolt E-300. Which was also released the same year as the Nikon D70 (2004), and which also didn't stop being a camera when the newer E-330 was released  a couple of years later.

But why am I posting about it now - you ask? Well, I've only gone and bought one, haven't I! And why would you do that - you ask (again). That's a very good question, and I'm still trying to figure that out I suppose. But I have a few ideas....

Firstly, and perhaps most importantly, it was darn cheap. I mean throw-away cheap. Of course there are a few reasons for that. A) its age - yes, it's an old camera from 2004 - practically a dinosaur technologically speaking (although you already know what I feel about that line of reasoning). We live in such a consumer-driven throw-away society, that any technology older than a few years is seen very quickly as redundant and un-useable. Which makes some of these old digital cameras a complete bargain. Ironically, they are even cheaper than old film cameras. But, of course, old technology does come with a few risks. That leads me nicely into point B) its condition. It's not in a good state. In fact giving it the term 'beater-camera' might be doing it a favour? So buying it as-is was a bit of a gamble. It may not even work at all? The seller made no promises - but did say that it was powering on when the battery was charged. So that's something I guess?

As you can see from the photos, which are of the actual camera I've purchased, it has had a pretty hard life by the looks. As seen above, the CF card door looks busted and held together by tape, and general overall condition is poor. I'm hoping that it's only cosmetic, and I won't mind using tape to keep the CF card door closed if I have to.

Actually what concerns me the most is the lens. It comes with the standard 14-45mm f3.5/5.6 kit lens, but there's something very wrong with it in the pictures supplied for the auction. For a start, it's on upside down! And it also appears to have some sort of adapter between it and the camera body? The guy selling it 'seems' to not know much about cameras. He's being very vague anyway - which also may not be a great sign. But, once again, I'm hoping that it's all purely cosmetic, and a functional camera will arrive in the post. Wishful thinking? I hope not.

So why did I but it then? I guess GAS (Gear Acquisition Syndrome) had something to do with it. I just like buying and trying cameras. Despite all my reservations with the condition, auction images and seller, ultimately I suppose I smelled a bargain, and it was too good to refuse. Which takes me back to my original point - it was cheap. So even if it turns up DOA, I'm not really in it for much and can chalk it up to experience. But if it actually works...

Second reason I decided to get the Olympus E-300 is simple - I've always wanted one. I remember vividly when they first came out, and I wanted one then. Some reviewers at the time called the camera ugly, and it's certainly unconventional. But I like the look of it. I also like the fact that it's different from most other DSLR's - both then and now. I guess it reminds me a little of my Fuji X-E2, with its rectangular shape and viewfinder off to the left-hand side. And although it might look like a rangefinder styled mirrorless camera, it's certainly not.

The Evolt E-300 uses a rather unique mirror system instead of a pentaprism to create the view through the optical viewfinder. Olympus called it an Optical Porro Finder, and its sideways swinging mirror lends to the camera's flat-top profile. Instead of the image from the lens being directed upwards to the viewfinder prism it is directed rightwards and then up to the viewfinder which is offset from the lens axis. A similar system was used by Olympus in their Pen series of film cameras. To my knowledge, the Olympus E-300 and E-330 are the only DSLR's to ever use this unique mirror design (I could be wrong), so that alone makes me want to try the camera out. Some may think it's ugly. I actually think it's kinda cool looking. And it looks positively bad-ass with the optional grip attached!

It has an 8MP 4/3rds sensor from Kodak, and was the second DSLR Olympus released using the 4/3rds sensor mount (the original 4/3rds, not micro 4/3rds). ISO's go from 100 to 400, with a boost up to 1600 which isn't advisable. It has no IS - that came a little later. And there's also no live-view, but I'm not bothered by that. The lcd on the back is only 1.8" and low-res, so wouldn't be much good for live view anyway. It does have a silent-wave sensor cleaning system. shutter speeds up to 1/4000th, and a +/-5 EV exposure compensation range! It shoots in RAW, RAW+Jpeg, and Tiff - although I'll probably try to get the best out of the sensor by processing the RAW file.

The seller online described the camera as a 'project' for somebody, and that's exactly how I'm viewing it. I'll clean it up, hopefully get it to work, and then take it out and see what kind of images I can make with it. IF it's a working unit, and IF I enjoy using it, then it may just be the start of my journey into 4/3rds? Zuiko glass is top quality, and apparently some of the 4/3rds lenses are right up there with Canon 'L' series at a fraction of the price. I'm not put off by a 4/3rds sensor, just as I wasn't put off by micro four thirds. At the end of the day, they are all just tools you can use to create your own vision. I just hope that this tool actually works!?

=================================================================
UPDATE
The camera arrived not longer after publishing this post - and nope - it didn't work! DOA 😱😠
Oh well, you win some, and you loose some....